product
SFSP series hammer mill
■ Applicable for coarse and fine grinding of Livestock, poultry, aqua feed and raw materials for starch, citric acid;
■ Particle size varies from 10-60 mesh
■Sieve is mounted centrifugally and gap between beaters and sieve is adjustable
■ Tear circle type grinding chamber; two options for rotors, therefore the particle size and capacity can be optimized.
Main Technical Parameters
|
model |
1180 -Ⅰ |
1180 –Ⅱ |
1180 –Ⅲ |
1180 –Ⅳ |
1180 –Ⅴ |
|
Power(kw) |
55/75 |
90/110 |
132/160 |
200/220/250 |
250/280/350 |
|
capacity(t/h) |
10～15 |
18～22 |
26～32 |
40～50 |
50～63 |
|
model |
1380 -Ⅰ |
1380 –Ⅱ |
1380 –Ⅲ |
1380 –Ⅳ |
1380 –Ⅴ |
|
power(kw) |
75/90 |
110/132 |
160/200 |
220/250 |
3000/350 |
|
capacity(t/h) |
14～19 |
21～28 |
35～43 |
48～55 |
62～70 |
SFSP112 Hammer mill
• The machine adopted the international advanced technology grinding facilities. Pin coupling direct connection driving;
• The body and partitions are manufactured by laser cutting;
• Low energy consumption, high output, low failure rate and grinding uniform;
• Safe operation door to ensure it is locked when operation;
• Convenient maintenance and replacement of sieve;
• It can adapt to different materials grinding, especially for grinding corn, feed meal and other common materials.
Main technical parameters
|
Model |
Dia. of Rotor (mm) |
Width Of Grinding Chamber (mm) |
Speed of Rotor (rpm) |
Power (kw) |
Capacity (t/h) |
|
SFSP112×30 |
1080 |
300 |
1480 |
55 |
7-11 |
|
SFSP112×30 |
1080 |
300 |
1480 |
75 |
10-15 |
|
SFSP112×40 |
1080 |
400 |
1480 |
90 |
12-18 |
|
SFSP112×40 |
1080 |
400 |
1480 |
110 |
15-22 |
Note: The above indices are those when meeting the following conditions: raw material: corn, moisture content not higher than 14%, density no lower than 0.72t/m3, screen: hole diameter ￠3mm, hole-opening rate no less than 33%.
If you have any inquiries, please mail to info@metfis.com, we will serve you to your utmost.